Portable Mini-Room UV Sterilizers - Portable Mini-Room UV Germicidal Lamp Sterilizer

"Portable Mini-Room UV Germicidal Lamp Air Sterilizer Reduces Airborne and Surface Bacteria, Viruses and Mold Spores In Rooms Up To 200 Sq. Ft."

This portable room UV germicidal one-bulb air sterilizer will effectively reduce microorganisms such as viruses, bacteria and mold spores up to 200 square feet. The light is guarded so the room can be occupied while the unit is in use.

Features:
- Internal Air Filter
- Sterilizes air in rooms up to 200 sq. ft.
- High intensity 9-watt germicidal lamp
- Light weight – 8 lbs
- Compact unit – 5½” x 9½” x 7¼”
- Variable speed fan 10 –100 cfm
- 120 volts, 60 hertz, 1.02 amps

Provides a clean environment by reducing airborne and surface bacteria, viruses and spores. It is recommended that you replace the UV germicidal lamps once a year.  Effective lamp life is approximately 8,000 hours. The filter should also be replaced annually.

Lamp Specifications:
- Lamp Wattage /electrical/ 36W 54.4W
- UV Output /253.7nm@100 hrs/ 12W 18.13W
- Intensity @ 1 meter 106µW/cm²/sec 174µW/cm²/sec
- Intensity @ 1 foot 800µW/cm²/sec 1,200µW/cm²/sec

BreathePureAir's Ultraviolet Germicidal Lamp Specialist can help you select the fixture size, type and arrangement to satisfy any application you might need. 

The UVC germicidal lamp is packaged separately to prevent breakage.
Do not plug into outlet until your UV lamp is installed. To install lamp:

1. Remove four larger screws – two from each side of top panel with Philips screwdriver.

2. Lift with handle and set aside

3. Clean lamp with lint free cloth and alcohol or water. Do not touch the glass with bare hands!

4. Insert lamp base into white socket in base. Secure matching bi-pins – Do not force!

5. Make sure the safety switch in the back clicks when pushed downward.

6. Check wiring connections to ensure shipping has not loosened any connections.

7. Reinstall the cover with four screws.

8. Plug unit into standard 110/120 volt, 60Hz outlet (220 volt, 50Hz – if specified).

9. Put the toggle switch to “ON” to power the lamp

10. Position the knob on front to desired fan speed.

See our entire line of UV air purifiers and sterilizers.

If you have any questions. Call us, we'll be glad to help!

1-877-688-2703

---