IQAir Accessories: InFlow W125

The InFlow W125 ducting kit enables any IQAir filtration system to draw air through a wall or window vent into an indoor environment. Use of the InFlow W125 is advisable when the main pollution source is located in adjacent indoor environments or outdoors.

Enjoy controlled clean air ventilation
An IQAir® filter system combined with an InFlow W125 can be installed to draw outdoor air into an indoor environment. In this setup, an IQAir serves as a ventilation system, bringing in oxygen-rich outdoor air and a filtration system, which removes undesirable outdoor pollutants such as pollen, mold spores, dust and exhaust soot. As a result, fresh and filtered outside air comes into the room.

Create clean positive pressure areas
An IQAir® filter system combined with an InFlow W125, which draws air into a room will in most cases allow the creation of a positive pressure. This positive pressure helps to clean the air in a room by constantly flushing out air pollutants and by preventing outside pollutants from entering the room
 

Rating: - Excellent
Availability: 1-2 days
Warranty: 1 Years

Accessory: InFlow W125

Accessory: Inflow W125 General Information:

Application Examples

• Protection of allergy sufferers from pollen exposure in their home

• Protection of patients from microbiological exposure (e.g. aspergillus) in a hospital

• Creation of clean research or manufacturing areas (controlled environments)

• Protection of plant control rooms from corrosive contaminants

• Creation of a clean zone within a home or office which helps to prevent outdoor pollution from

• nature, factories, traffic, agriculture to enter.

Using an InFlow W125 with an IQAir system can improve indoor air quality by:

• Diluting polluted air with clean air 

• flushing out air pollutants

• reducing influx of new outside pollutants due to a build-up of positive pressure

• by increasing oxygen content in indoor air (when outdoor air is being drawn in)

Installation
The InFlow W125 kit can be easily added to any IQAir filtration unit in a matter of minutes. As regards the building, the only modification required is a 5” hole in a window, wall or door which allows to connect the InFlow W125 aluminum duct.

The duct may be freely flexed to allow control over the desired vent location. It is expandable in length, from 10” in its original compressed state, to 39” when fully extended.

IQAir Compatibility
Compatible with all IQAir filtration devices.
Not compatible with the accessories PF40, VMF, VM FlexVac, VM InFlow and FlexVac.

See our complete line of IQAir purifiers,  home air purifiers, cleanroom air purifiers, or medical/dental air cleaners.

If you have any questions, call us, we'll be glad to help!

1-877-688-2703

Return Policy  |  Contact Us  |  About Us  |  View Cart  |  Check Out

©2001 - 2006 - BPA Air Quality Solutions LLC
(DBA BreathePureAir.com) is for educational and research intentions only and is not intended as an alternative for medical treatment or advice. Use of this website, the 90 day return policy, and free shipping is subject to our published privacy policy, terms of service, and return policy.