How to Sample for Mold Testing

"Follow These Easy Instructions to Take a Mold Sample..."

1. Lightly TOUCH the sticky side of the TAPE strip TO THE TEST SURFACE and then remove. The tape should show a visible deposit, but should not appear “overloaded”. (If a sample is too heavy or has large particles, it can be difficult to read under the microscope and should be repeated.)
    
2. PLACE the TAPE SAMPLE ONTO THE PLASTIC SLIDE attached to the MAIL-BACK TEST CARD (align it with bottom drawing).
    
3. LABEL the TAPE with the sample number using a ball point pen.
    
4. RECORD the ROOM AND ITEM SAMPLED on the corresponding lines to the left of the slide.
    
5. REPEAT steps 1-4 for OTHER sample test LOCATIONS (option of 1, 2 or 3 tests per kit).
    
6. PLACE the MAIL-BACK TEST CARD in the self-addressed envelope and drop it in the MAIL.
    
7. RECEIVE your written RESULTS along with an INFORMATION BOOKLET describing how to clean up and prevent mold growth.

Mold Test Links

Why Sample
Where to Sample
How to Sample
Compare Testing Kit

See our entire line of Air Monitoring Equipment.

If you have any questions, call us, we'll be glad to help!

1-800-551-8544

Return Policy  |  Contact Us  |  About Us  |  View Cart  |  Check Out

©2001 - 2006 - BPA Air Quality Solutions LLC
(DBA BreathePureAir.com) is for educational and research intentions only and is not intended as an alternative for medical treatment or advice. Use of this website, the 90 day return policy, and free shipping is subject to our published privacy policy, terms of service, and return policy.